UMC740-UV_valley_W7786_irrigate machine gearbox motor↓

Belongs to Irrigation special gearbox category.(Click on the category name to return to the previous page.)

Original brand products

  • Gear typeWorm gearbox
  • Shaft orientation90 degrees vertically
  • MaterialCast iron
  • product name
  • Product category
  • Input speed
  • Body material
  • Input style
  • Output style
  • Other
    characteristics
  • Shaft orientation
  • Gear type
  • Fixed way
  • Ratio
  • In Power
  • Out Torque
  • Other parameters
  • UMC740-UV_valley_W7786_irrigate machine gearbox motor
  • Irrigation special gearbox
  • <1500r/min
  • Cast iron
  • solid shaft
  • Hub connecting flange
  • irrigate machine gearbox
  • 90 degrees vertically
  • Worm gearbox
  • flange
  • 52:1
  • 0.75HP~1.5HP
  • Standard
  • Can replace UMC, DURST, ZIMMATIC, Valley gearbox
  • 【Similar product recommendation】
  • 0.75HP-1.5HP center drive motor

    Coupling sleeve_drive shaft sleeve_center pivot irrigate machine

    Pive Drop Elbow,center pivot irrigate machine

    Drive Line Coupler,center pivot irrigate machine

    Towable Conversion Kits_irrigate machine center pivot irrigate machine

    UMCTNT2-U_irrigate machine gearbox motor

Product Details


Superior design: Three times the life of competitive gearboxes based on independent tests


Bull gear: 20% higher torque capacity based on independent tests


Longer output shaft: Increases mud and crop clearance, reducing chance of seal damage


Special offset rims: Positions tire close to gearbox to minimize bearing loads for longer life


Input and output bearings: American made and case hardened; Industry''''''''''''''''s highest load rating for longer life


Gearbox housing: More material in high-stress areas to handle extreme operating conditions


Bronze bull gear option: Provides additional load capabilities with hardened steel worm for extreme operating conditions or extended life under less severe conditions

Large-capacity rubber diaphragm: Expands with heat and pressure to minimize water condensation.


Input and output bearings: American made and case hardened to provide the highest quality and highest load rating available in the industry.


Worm gear: High-strength ductile iron provides significantly longer wear life than steel when combined with a cast iron bull gear.


Tooth design: Industry exclusive 25° tooth angle provides 40% longer life and better reliability in tough conditions compared to normal 14 1/2° tooth designs.


Largest bull gear neck and keyway: For strength in critical load-bearing area.


Expansion chamber: Cap made of corrosion-resistant cast aluminum; rubber diaphragm allows oil to expand and contract during operation. Vented cap prevents pressure buildup and prevents seals from leaking.


Threaded endcap: Allows accurate bearing preload to increase bearing life.


52:1 gear ratio: Fully recessed tooth design keeps oil between engaged gears.


Bull gear: High-strength cast iron provides the highest load capacity and longest life in the industry. Optional bronze gear is available for extreme conditions.


Multi-viscosity gearbox oil: Exceeds 85w140 GL5 oil for long gear wear under extreme load conditions.

Common doubts

  • 1.What is the size of the drawing, mm or inch?
  • Inches, the same size as other brands.
  • 2.Can I provide other parts of the central pivot irrigation machine?
  • We have all the parts of the irrigation machine, good quality and reasonable price.
  • 3.About the material of the product?
  • It is completely consistent with the materials used by well-known brands and can be purchased with confidence.
  • 4.We use the products of UMC brand. Can you replace it?
  • The appearance of the product is a little different, but the size and overall performance of the mounting holes are no different from UMC products. Gu
  • 5.Can I replace the reducer or central drive of Dester ZIMMATIC and Valley?
  • We offer a wide range of mounting holes for the same reducer or center drive, making it a perfect replacement for different brands.

Cooperation guarantee

  • Stable and good

    Can provide a stable and qualified products.

  • High cost performance

    Reasonable and transparent price, can let you save a lot of unnecessary spending.

  • Delivery fast

    The reasonable production can accurately calculate the production cycle, thus to provide faster delivery time.

  • Reliable and beautiful packaging

    Product packaging first appearance beautiful, internal have a large number of buffer grid, can effectively avoid knock against, and other damage.

  • Uninterrupted service

    Interval to get in touch with you and understand the performance of the products, to provide you with the most rapid technical support and after-sales service.

Customer service commissioner.

Recommended top customer service staff

We recommend 5 high level customer service staff, you can contact one of your favorite ones.

Jenny Zheng

  • Email:
  • Jenny@Liudrive.com
  • Wechat:
  • 13472125325
  • whatsapp:
  • 008613472125325
  • Any questions can be exchanged at any time, I am happy to serve you.

Jason Su

  • Email:
  • Jason@Liudrive.com
  • Wechat:
  • 18633450637
  • Whatsapp:
  • 008618633450637
  • Any questions can be exchanged at any time, I am happy to serve you.

Bobby Qiu

  • Email:
  • china@Liudrive.com
  • Wechat:
  • 18633450627
  • whatsapp:
  • 008618633450627
  • Any questions can be exchanged at any time, I am happy to serve you.

Jack Liu

  • Email:
  • Jack@Liudrive.com
  • Wechat:
  • yzwhngiv23442
  • whatsapp:
  • 008613073123456
  • Any questions can be exchanged at any time, I am happy to serve you.

woson

  • Email:
  • China@Liudrive.com
  • Wechat:
  • qiuxuejia6207
  • whatsapp:
  • null
  • Any questions can be exchanged at any time, I am happy to serve you.
1V1 dedicated account manager7x24H after sales support180S speed response
Friend station connection:
Copyright @ 2008-2030 www.Liudrive.com. All Rights Reserved. DrivesLiu.com all rights reserved